Concord sits in Jefferson County, and our work here runs from the Warrior River Road corridor out past the Warrior River, with Bessemer and Homewood close enough that we are usually in the area anyway.
Door problems in Concord tend to sort into two groups: older homes where the frames and jambs have taken decades of weather, and newer builds where the hardware was the cheapest part of the package and has already given up.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895When to call about automatic door repair
These are the automatic door repair faults we are called out to most often in Concord. If you recognise one, the underlying cause is usually the second half of the line.
- The push plate does not activate the doorFailed plate, wiring or receiver.
- Uneven gap between bi-parting panelsCarriers or belt out of adjustment.
- Grinding or squealing from the headerWorn carriers, belt or motor bearings.
- The belt has visible cracking on the toothed faceAge and UV exposure, and it will strand the door when it goes.
- The door opens partway and stopsObstruction detection triggering, or a mechanical bind in the track.
- The door opens for no reasonActivation sensor picking up movement it should not, or a sensor that has drifted out of adjustment.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895What we see on automatic door repair around Jefferson County
Two storm seasons a year, spring and late fall, push water and debris against exterior doors across the metro.
Building movement puts an automatic door header out of level, and these systems have very little tolerance for that, so a door that has started binding at one end of its travel is often reporting the building rather than the door.
Moisture in a header assembly corrodes contacts and connectors, and humidity is the most common reason a sensor that tests fine on a dry day behaves erratically in the morning.
Knowing that is the difference between a repair that holds through a Concord summer and one that does not.
Local factors we account for in Concord: soil movement and sustained humidity — typical of the Birmingham metro.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895What we repair
- Emergency manual securingSafely securing a failed automatic door so a building can be locked.
- Controller and board replacementReplacing failed control boards and reprogramming operating parameters.
- Preventive maintenanceScheduled inspection and adjustment to keep operators reliable.
- Weatherstrip and sweep replacementSealing automatic entrances against air and water infiltration.
- Sensor replacement and alignmentActivation and safety sensors adjusted or replaced to correct detection patterns.
- Safety compliance checksVerifying the door meets the applicable safety standard for detection and force.
- Low-energy ADA operator serviceRepairing and adjusting push-plate operated accessible doors.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895How we approach automatic door repair
- Establish whether it is safe to runSome faults are a nuisance and some are a hazard. We decide which this is before the door goes back into service.
- Separate mechanical from electronicWe check the door by hand with the operator disengaged, because a door that binds mechanically will defeat any amount of controller adjustment.
- Map the detection patternSensors get walk-tested from every approach angle, because a door that works for staff can fail for a child or a wheelchair user. We flush the running surfaces properly on metro jobs rather than just wiping them, since fine clay packs into places a cloth will not reach.
- Repair and adjustCarriers, belts, sensors and controller settings all brought back to specification.
- Verify against the safety standardDetection, hold-open time and force are checked, not assumed.
- Leave it usableIf parts have to be ordered, the door leaves in a safe, secure, usable state.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895What affects the cost of automatic door repair in Concord
Pricing on automatic door repair depends on what has actually failed, which is why we talk it through before quoting. These are the things that move the number:
- the age of the system and whether parts are still supported
- sliding versus swing operator systems
- sensor and adjustment work versus operator or controller replacement
- emergency or after-hours response
- the number of openings on a maintenance schedule
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Concord.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Areas we cover for automatic door repair in Concord
Coverage in Concord takes in the Warrior River Road corridor, plus everything around the Warrior River and Hueytown nearby.
We also cover the nearby Jefferson County and the Birmingham metro communities listed further down this page.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Automatic door repair in Concord: questions we get asked
Can an automatic door be secured if the operator fails?
Yes. A failed operator does not mean an unsecured building. We can make the door safe and lockable manually while parts are on order.
How quickly can you respond to an automatic door failure?
Safety and security issues get priority. Call and tell us what the door is doing, because a door that will not open and a door that closes on people are very different levels of urgency.
Our automatic door lets weather into the entrance. Can that be fixed?
Yes. Automatic entrances have weatherstrip and sweeps like any other door, and in Jefferson County an entrance that does not seal properly will move a lot of conditioned air and let water in during storms.
Why does our automatic door open when nobody is there?
The activation sensor is picking up something it should not: movement outside the intended zone, rain, or a reflective surface. The detection pattern needs adjusting rather than the sensor replacing.
How often should automatic doors be inspected?
The industry standard is a daily safety check by staff and periodic professional inspection. For a busy Concord entrance that means regular scheduled service, not waiting for a failure.
Do you work on ADA push-plate doors?
Yes. Low-energy operators on accessible entrances are common in Concord clinics, offices and public buildings, and they need both mechanical and adjustment work to keep meeting requirements.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895Other door repair services in Concord
- Sliding Door Repair Concord
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Concord
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Concord
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Concord
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Concord
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Concord
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Concord
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Concord
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Concord
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Door Closer Repair Concord
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Screen Door Repair Concord
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Concord
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Concord
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Concord
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Concord
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Automatic Door Repair near Concord
We cover the surrounding Jefferson County and the Birmingham metro communities as well:
- Automatic Door Repair in Bessemer
- Automatic Door Repair in Homewood
- Automatic Door Repair in Vestavia Hills
- Automatic Door Repair in Mountain Brook
- Automatic Door Repair in Hueytown
- Automatic Door Repair in Center Point
- Automatic Door Repair in Gardendale
- Automatic Door Repair in Irondale
All door repair services in Concord · Automatic Door Repair across Alabama · All Alabama service areas
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895