Evergreen sits in Conecuh County, and our work here runs from Downtown Evergreen out past the Conecuh County Courthouse, with Greenville and Georgiana close enough that we are usually in the area anyway.
A lot of what we see in Conecuh County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895The door closer repair problems we see most in Evergreen
These are the door closer repair faults we are called out to most often in Evergreen. If you recognise one, the underlying cause is usually the second half of the line.
- The closer arm is bentThe door has been forced open past its stop, usually by wind or by a cart.
- The door does not close the last inchClosing force is too low, or the door is binding on the frame in the final approach.
- The door closes fast then stops shortMismatched sweep and latch speed settings.
- The arm has come loose at the forearm connectionA backed-out or stripped screw, which will bend the arm if it is left.
- A fire door that stays openSerious safety issue: failed closer or a hold-open that should be releasing.
- The door closes at a good speed then slams the last inchLatch speed set too fast, or a worn valve that no longer holds the latch adjustment.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Evergreen conditions and door closer repair
Sandy soil here drains fast but also shifts, and blowing sand is a constant presence in sliding door tracks and screen channels.
Water running down a door face and into a surface closer body corrodes the internals and the mounting fasteners, and a closer that has been wet repeatedly usually fails at the seal.
Wind is the main killer of door closers: a gust drives the door past its opening limit, bends the arm and often tears the mounting out of the door, which is why an overhead stop is not optional on an exposed door.
Knowing that is the difference between a repair that holds through a Evergreen summer and one that does not.
Local factors we account for in Evergreen: heavy rainfall and storm wind — typical of the Wiregrass.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Door closer repair work we handle in Evergreen
- Spring hinge and closer conversionReplacing failed spring hinges with a proper closer where the door needs it.
- Accessibility force adjustmentSetting opening force to meet accessibility requirements without losing reliable latching.
- Arm and bracket replacementReplacing bent arms, broken forearms and failed mounting brackets.
- Surface closer replacementNew surface mounted closers sized correctly for door width and weight.
- Delayed action setupAdding delayed closing for accessibility so people have time to get through.
- Hold-open arm serviceRepairing and adjusting hold-open functions.
- Closer adjustmentSetting sweep speed, latch speed and backcheck correctly for the door and its traffic.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895How we approach door closer repair
- Watch the door close, twiceThe speed of the last few inches and the first few tells us most of what we need to know before we touch a valve.
- Rule out the door before blaming the closerA door binding on the frame makes a perfectly good closer look weak, and turning the closer up is the wrong answer.
- Check for the simple faultsLoose arm fixings, a bent forearm or a seized pinion account for a lot of closers that look dead.
- Size the replacement properlyCloser size depends on door width and weight and on whether it faces exterior wind. Undersized closers fail early. We look at how much sand is reaching the opening, since sometimes a sweep or a threshold change does more good than new hardware.
- Set for people, not just latchingOpening force is checked so the door is usable by everybody, then latch speed is set so it still closes properly.
- Fit a stop where it is neededA door with no stop will destroy its own closer the first time the wind catches it.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895What affects the cost of door closer repair in Evergreen
Every door closer repair call in Conecuh County is a little different, and the cost follows what the door actually needs:
- adding overhead stops or hold-open functions
- adjustment versus rebuild versus full replacement
- whether the mounting has to be repaired or reinforced
- the size and weight of the door and its exposure to wind
- fire rating and accessibility compliance requirements
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Evergreen.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Areas we cover for door closer repair in Evergreen
If you are in Downtown Evergreen, the courthouse square and the I-65 exit 96 corridor, or anywhere near the Conecuh County Courthouse, the Evergreen depot and Conecuh National Forest nearby, we cover you.
We also cover the nearby Conecuh County and the Wiregrass communities listed further down this page.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Door closer repair in Evergreen: questions we get asked
There is oil dripping from my door closer. Can it be refilled?
No. Closers are sealed units, and once the seal fails the closer is finished. Refilling is not possible on standard units and the unit needs replacing.
How long do door closers last?
A good quality closer on a properly hung door can run for well over a decade. A cheap closer on a heavy exterior door in Evergreen might last a couple of years, especially if it is fighting a misaligned door.
Do door closers need different settings in summer and winter?
They can. The hydraulic fluid thins in heat and thickens in cold, so a closer set perfectly in Evergreen in August may close too slowly in January. Quality closers hold their setting better across the temperature swing.
Our fire door is propped open. Is that a problem?
Yes, and it is one of the most common code violations we see. A fire door that cannot close and latch is not doing anything. If it gets propped because it is hard to use, that is the problem to solve.
What size closer do I need?
It depends on the door width, weight and exposure. Exterior doors in Conecuh County also need to handle wind, and an undersized closer on a windy exposure gets destroyed.
Can you make our door easier to open for accessibility?
Yes. Opening force can be adjusted, delayed action can be added, and if the door genuinely cannot meet requirements mechanically there are power operators. Getting the mechanical adjustment right comes first.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Other door repair services in Evergreen
- Sliding Door Repair Evergreen
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Evergreen
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Evergreen
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Evergreen
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Evergreen
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Evergreen
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Evergreen
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Evergreen
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Evergreen
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Automatic Door Repair Evergreen
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Evergreen
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Evergreen
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Evergreen
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Evergreen
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Evergreen
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Door Closer Repair near Evergreen
We cover the surrounding Conecuh County and the Wiregrass communities as well:
- Door Closer Repair in Greenville
- Door Closer Repair in Georgiana
- Door Closer Repair in Luverne
- Door Closer Repair in Troy
- Door Closer Repair in Brundidge
- Door Closer Repair in Eufaula
- Door Closer Repair in Clayton
- Door Closer Repair in Clio
All door repair services in Evergreen · Door Closer Repair across Alabama · All Alabama service areas
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895