We know Moores Mill well: the older housing around Moores Mill Road, the newer construction toward Winchester Road, and everything out past Sharon Johnston Park.
Between the established parts of Moores Mill and the newer subdivisions, we see two different kinds of failure: worn-out frames on one side of town and worn-out hardware on the other.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895What Moores Mill customers call us about
These are the door closer repair faults we are called out to most often in Moores Mill. If you recognise one, the underlying cause is usually the second half of the line.
- The door closes at a good speed then slams the last inchLatch speed set too fast, or a worn valve that no longer holds the latch adjustment.
- The hold-open function has stopped workingWorn hold-open mechanism in the arm.
- The closer works well cold and slams when hotFluid thinning with temperature in a unit whose valves can no longer compensate.
- The door is very hard to push openCloser over-tensioned, often to compensate for a door that will not latch.
- Oil running down the door or the wallFailed seal inside the closer body. The unit needs replacing.
- The door slams open against the wallBackcheck has failed or is not adjusted, and the arm and frame are taking the impact.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895What we see on door closer repair around Madison County
North Alabama sits in the heart of Dixie Alley, and the March and November storm seasons drive rain sideways against doors that face west and south.
Water running down a door face and into a surface closer body corrodes the internals and the mounting fasteners, and a closer that has been wet repeatedly usually fails at the seal.
Wind is the main killer of door closers: a gust drives the door past its opening limit, bends the arm and often tears the mounting out of the door, which is why an overhead stop is not optional on an exposed door.
We see the pattern often enough across Madison County that we usually know what we are looking at before we arrive.
Local factors we account for in Moores Mill: heavy rainfall and storm wind — typical of the Tennessee Valley.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895What a door closer repair call covers
- Surface closer replacementNew surface mounted closers sized correctly for door width and weight.
- Accessibility force adjustmentSetting opening force to meet accessibility requirements without losing reliable latching.
- Arm and bracket replacementReplacing bent arms, broken forearms and failed mounting brackets.
- Spring hinge and closer conversionReplacing failed spring hinges with a proper closer where the door needs it.
- Wind and stop protectionFitting overhead stops so wind cannot destroy the closer arm.
- Delayed action setupAdding delayed closing for accessibility so people have time to get through.
- Concealed closer serviceOverhead concealed closers in aluminum storefront doors repaired or replaced.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895What happens when we get there
- Watch the door close, twiceThe speed of the last few inches and the first few tells us most of what we need to know before we touch a valve.
- Rule out the door firstA closer struggling against a binding door is not a faulty closer. Hinges and reveal get checked before we condemn the unit.
- Adjust before replacingMany closers we are called to are serviceable and simply out of adjustment. That is a much smaller job and we say so.
- Match to the opening's dutyA fire door, an accessible entrance and an internal office door have different requirements, and the specification follows the door.
- Set for people, not just latchingOpening force is checked so the door is usable by everybody, then latch speed is set so it still closes properly. Valley jobs get checked across the humidity swing, so we adjust for the range rather than for the day we happen to be there.
- Fit a stop if it needs oneA closer with no backcheck and no stop will eventually put the handle through the wall and tear its own fixings out.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895What affects the cost of door closer repair in Moores Mill
There is no single price for door closer repair in Moores Mill, because two doors with identical symptoms can need very different work. Here is what makes the difference:
- surface, concealed or floor mounted closer type
- the size and weight of the door and its exposure to wind
- whether the mounting has to be repaired or reinforced
- adding overhead stops or hold-open functions
- adjustment versus rebuild versus full replacement
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Moores Mill.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Areas we cover for door closer repair in Moores Mill
Moores Mill coverage runs across Moores Mill Road and Winchester Road, and out to the areas around Sharon Johnston Park and Hampton Cove not far south.
We also cover the nearby Madison County and the Tennessee Valley communities listed further down this page.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Door closer repair in Moores Mill: questions we get asked
What size closer do I need?
It depends on the door width, weight and exposure. Exterior doors in Madison County also need to handle wind, and an undersized closer on a windy exposure gets destroyed.
Do door closers need different settings in summer and winter?
They can. The hydraulic fluid thins in heat and thickens in cold, so a closer set perfectly in Moores Mill in August may close too slowly in January. Quality closers hold their setting better across the temperature swing.
Do you work on floor closers?
Yes. Floor closers under heavy entrance doors are serviceable, though they are more involved to work on because the unit sits in the floor.
Why is our door so heavy to open now?
Somebody has probably turned the closer up to force a door that was not latching. That is treating a symptom, and it makes the door difficult for customers and staff. Fix the latching problem and the closer can come back to a reasonable setting.
Can you make our door easier to open for accessibility?
Yes. Opening force can be adjusted, delayed action can be added, and if the door genuinely cannot meet requirements mechanically there are power operators. Getting the mechanical adjustment right comes first.
Our fire door is propped open. Is that a problem?
Yes, and it is one of the most common code violations we see. A fire door that cannot close and latch is not doing anything. If it gets propped because it is hard to use, that is the problem to solve.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Other door repair services in Moores Mill
- Sliding Door Repair Moores Mill
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Moores Mill
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Moores Mill
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Moores Mill
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Moores Mill
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Moores Mill
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Moores Mill
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Moores Mill
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Moores Mill
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Automatic Door Repair Moores Mill
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Moores Mill
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Moores Mill
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Moores Mill
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Moores Mill
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Moores Mill
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Door Closer Repair near Moores Mill
We cover the surrounding Madison County and the Tennessee Valley communities as well:
- Door Closer Repair in Madison
- Door Closer Repair in Meridianville
- Door Closer Repair in Harvest
- Door Closer Repair in Hazel Green
- Door Closer Repair in Triana
- Door Closer Repair in New Hope
- Door Closer Repair in Owens Cross Roads
- Door Closer Repair in Redstone Arsenal
All door repair services in Moores Mill · Door Closer Repair across Alabama · All Alabama service areas
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895