Our Newton customers are spread from Main Street to the AL-123 corridor and out around the Choctawhatchee River, and we serve the surrounding Dale County communities on the same schedule.
A lot of what we see in Dale County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895When to call about door frame repair
These are the door frame repair faults we are called out to most often in Newton. If you recognise one, the underlying cause is usually the second half of the line.
- Daylight under the thresholdThe sill has deteriorated or the threshold has come loose from the subfloor.
- Gaps between the jamb and the wallThe frame has pulled loose from the framing behind it, or the fasteners have lost their grip.
- The jamb sounds hollow when you tap itRot that has consumed the core while the paint film outside still looks intact.
- A hinge screw goes in but never gets tightThe screw is turning in decayed wood or in an over-drilled hole with nothing left to bite.
- A visible slope on the head jambStructural settling. The header above the opening has dropped on one side.
- Interior trim pulling away from the wallMovement in the frame or the wall behind it.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Newton conditions and door frame repair
The Wiregrass gets punishing summer heat and enough tropical rain that hurricane remnants are a normal part of the year, not an exception. Sally and Michael both did door and window damage this far inland.
Sun destroys the paint film on exposed jamb and brickmould faces, and once the finish fails the wood behind it starts taking on water, which is how a frame that only ever gets weather from above ends up rotting.
Wind-driven rain hits a frame horizontally and finds the joint between the brickmould and the siding, which is where water gets behind the frame and does damage that is invisible until the jamb goes soft.
We see the pattern often enough across Dale County that we usually know what we are looking at before we arrive.
Local factors we account for in Newton: sun and heat load and storm wind — typical of the Wiregrass.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Our door frame repair services in Newton
- Kick-in damage repairRebuilding split jambs after a break-in and reinforcing them properly.
- Full frame replacementWhen the damage is beyond repair, replacing the frame without disturbing more of the wall than necessary.
- Frame re-squaringResetting and shimming the frame so the door has consistent reveal on all three sides.
- Steel and commercial frame repairRepairing hollow metal frames, anchors and welded joints.
- Strike jamb reinforcementSteel strike boxes and long screws into the framing to make a forced-entry repair stronger than the original.
- Hinge jamb repairRepairing stripped hinge mortises so the screws hold again.
- Threshold and sill replacementNew adjustable thresholds and sill pans so water drains out instead of in.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Our door frame repair process
- Find out what moved and whyWe check plumb, level and square across the opening and look for the cause, because a frame that is out of square because the foundation moved will go out of square again.
- Find where the water gets inRot is downstream of a leak. Repairing the timber without finding the entry point guarantees a repeat.
- Be straight about repair versus replacementSome jambs are worth splicing and some are past it. We tell you which this is rather than defaulting to the bigger job.
- Rebuild in material that survives hereTreated timber, composite or a full jamb depending on exposure. Untreated pine at a wet sill is a repair with an expiry date.
- Reset the door to the repaired frameConsistent reveal, correct hinge alignment and a latch that engages without pressure. We look at how much sand is reaching the opening, since sometimes a sweep or a threshold change does more good than new hardware.
- Seal it so it stays sealedCorrect sealant at the correct joints, and paint or finish onto sound substrate so water has nowhere to start again.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895What affects the cost of door frame repair in Newton
What a door frame repair job costs comes down to a handful of things, and we would rather be straight about them up front:
- wood versus hollow metal frames on commercial openings
- whether the threshold and sill pan also need rebuilding
- whether the frame can be spliced or has to be replaced
- interior versus exterior frames, since exterior work includes weatherproofing
- how far the rot or damage extends into the frame and framing
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Newton.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Areas we cover for door frame repair in Newton
If you are in Main Street and the AL-123 corridor, or anywhere near the Choctawhatchee River and the Newton town square, we cover you.
We also cover the nearby Dale County and the Wiregrass communities listed further down this page.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Door frame repair in Newton: questions we get asked
Do you repair metal commercial door frames?
Yes. Hollow metal frames in Newton businesses get damaged at the strike, at the floor anchors and around the hinges, and all three are repairable without replacing the whole frame.
Will fixing the frame fix my lock problems?
Very often, yes. If the deadbolt has been hard to throw, the strike side of the frame is usually the reason. Correcting the frame lines the bolt up with the strike again.
My frame is fine but the door still will not shut. What else could it be?
Hinges, the door slab itself swelling, or a strike that has moved. We check the whole opening rather than assuming, because misdiagnosing this is how people end up buying a door they did not need.
Can you fix a frame without disturbing the interior trim?
Usually. Most frame repairs can be done from the outside or from the door edge without pulling casing off the wall, which matters if the trim is original or the walls have just been painted.
How long does a door frame repair take?
A straightforward jamb splice or strike rebuild in Newton is a few hours. A full frame replacement with new threshold and flashing is most of a day. Structural movement that has to be addressed first can add to that.
Why does the bottom of my door frame keep rotting out?
Water is getting to it and staying there. That means a failed threshold, a missing sill pan, a drip cap that is not shedding water, or ground and mulch sitting too high against the sill. Replacing the wood without fixing the water just resets the clock.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895Other door repair services in Newton
- Sliding Door Repair Newton
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Newton
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Handle Repair Newton
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Newton
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Newton
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Newton
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Newton
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Newton
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Door Closer Repair Newton
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Automatic Door Repair Newton
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Newton
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Newton
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Newton
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Newton
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Newton
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Door Frame Repair near Newton
We cover the surrounding Dale County and the Wiregrass communities as well:
- Door Frame Repair in Ozark
- Door Frame Repair in Daleville
- Door Frame Repair in Fort Rucker
- Door Frame Repair in Level Plains
- Door Frame Repair in Midland City
- Door Frame Repair in Greenville
- Door Frame Repair in Georgiana
- Door Frame Repair in Luverne
All door repair services in Newton · Door Frame Repair across Alabama · All Alabama service areas
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895