Selma sits in Dallas County, and our work here runs from Downtown Selma out past the Edmund Pettus Bridge, with Valley Grande and Selmont-West Selmont close enough that we are usually in the area anyway.
A lot of what we see in Dallas County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895The french door repair problems we see most in Selma
These are the french door repair faults we are called out to most often in Selma. If you recognise one, the underlying cause is usually the second half of the line.
- The multipoint lock will not throwThe door is not sitting in the frame correctly, so the lock points do not line up with their keepers.
- The flush bolts on the inactive leaf need forcingMisaligned keepers, or corrosion in the bolt housings.
- Screws visible pulling out of hingesHinge fasteners failing under the weight of a heavy glazed leaf.
- Daylight visible along the astragalWeatherstrip compressed flat or missing entirely.
- The astragal weatherstrip is compressed flat in one areaPoint loading where the leaves bind, and the seal has stopped working there.
- Cold air pouring in down the middleFailed astragal weatherstrip on the joint between the leaves.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895How conditions in Selma affect french door repair
The wet winter and dry late-summer cycle here is severe enough that a door adjusted perfectly in February can bind badly by September.
Foundation movement under a French door opening drops one leaf relative to the other, and because the pair has to meet along a full-height joint, even slight movement shows as rubbing and a lock that will not throw.
The bottom of the meeting stile is the hardest place on a house to keep watertight, and heavy rain against a French door pair will find any weakness in the sill seal or the threshold there.
It is why the same repair done properly in Selma lasts, and the same repair done cheaply does not.
Local factors we account for in Selma: soil movement and heavy rainfall — typical of the Black Belt.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Our french door repair services in Selma
- Security upgradesReinforced strikes, longer fasteners and better flush bolts on exterior pairs.
- Alignment and reveal correctionSetting both leaves so the reveal is even and the doors meet cleanly top to bottom.
- Sliding French door serviceRollers, tracks and hardware on sliding French systems.
- Multipoint lock repairRepairing and replacing multipoint gearboxes, drive rods and keepers.
- Individual lite glass replacementReplacing failed or broken glass in single lites without replacing the whole door.
- Handle and lockset replacementMatched handle sets and cylinders for French door pairs.
- Threshold and sill workNew adjustable thresholds and sill seals under a pair of doors.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895How we approach french door repair
- Look at the pair as one assemblyFrench doors fail as a pair. Adjusting one leaf without reference to the other just moves the problem across.
- Check both leaves independentlyOne door usually causes the problem, and treating both the same way makes it worse.
- Correct the hinges before the hardwareMultipoint locks and flush bolts cannot be adjusted into working if the door is sitting in the wrong place.
- Rebuild the seal at the meeting stileAstragal and weatherstrip get replaced together, because that centre joint is where the draft and the water come through.
- Set the locking hardwareKeepers adjusted so the shootbolts engage top and bottom with the handle lifting smoothly and no forcing. On prairie clay we look at the whole opening for racking, because a door here is usually reporting a foundation movement rather than a hardware fault.
- Check it seals along its lengthWe look for daylight and feel for draft down the full height of the meeting stile, not just at eye level.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895What affects the cost of french door repair in Selma
Every french door repair call in Dallas County is a little different, and the cost follows what the door actually needs:
- glass replacement in individual lites
- multipoint lock repair versus full gearbox replacement
- whether the frame itself has moved and needs correcting
- interior versus exterior pairs, since exterior work includes weatherproofing
- astragal, weatherstrip and threshold replacement
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Selma.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Areas we cover for french door repair in Selma
Coverage in Selma takes in Downtown Selma, Old Town Historic District, Broad Street and the Highland Avenue corridor, plus everything around the Edmund Pettus Bridge, the Old Town Historic District and the Alabama River.
We also cover the nearby Dallas County and the Black Belt communities listed further down this page.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895French door repair in Selma: questions we get asked
Can one lite of glass be replaced or does the whole door need doing?
Individual lites can normally be replaced on their own. That is one of the advantages of a true divided or simulated divided light door.
How do I stop water coming in under my French doors?
Usually the threshold seal and the sill pan. A pair of exterior French doors has a hard job at the bottom of the meeting stile, and in Dallas County storms that is where water finds its way in.
My French doors bind in summer but are fine in winter. Is that normal?
Some seasonal movement is normal in Selma, but if it is bad enough to stop the door closing, there is usually an underlying alignment problem that the seasonal movement is pushing over the edge.
My French doors rub in the middle. Is that because the wood swelled?
Usually not. Nine times out of ten it is hinge sag on one leaf, and the giveaway is that the rub is worse at one end of the joint than the other. Real swelling affects the whole edge evenly and comes and goes with the season.
Are French doors less secure than a single door?
They can be, because there are two leaves and a joint in the middle. Reinforced strikes, solid flush bolts and long fasteners into the framing make a big difference and are inexpensive.
The inactive door keeps moving when I close the active one. Why?
The flush bolts at the top and bottom of the inactive leaf have failed or are no longer reaching their keepers. Both need to be solidly engaged or the whole pair loses its reference point.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Other door repair services in Selma
- Sliding Door Repair Selma
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Selma
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Selma
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Selma
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Selma
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Selma
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Selma
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Selma
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Selma
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Door Closer Repair Selma
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Automatic Door Repair Selma
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Selma
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- Interior Door Repair Selma
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Selma
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Selma
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
French Door Repair near Selma
We cover the surrounding Dallas County and the Black Belt communities as well:
- French Door Repair in Valley Grande
- French Door Repair in Selmont-West Selmont
- French Door Repair in Moundville
- French Door Repair in Livingston
- French Door Repair in York
- French Door Repair in Butler
- French Door Repair in Eutaw
- French Door Repair in Greensboro
All door repair services in Selma · French Door Repair across Alabama · All Alabama service areas
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895