Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Union Springs French Door Repair

Union Springs, Alabama · Bullock County

French Door Repair in Union Springs, AL

Exterior French doors take weather on two large glazed leaves and seal along a vertical joint in the middle, which is the hardest place in a house to keep sealed. Getting the astragal and weatherstrip right is most of the job.

  • Repair first, replace last
  • Homes & businesses
  • Bullock County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

French Door Repair diagram
French Door Repair — Union Springs, Alabama

We know Union Springs well: the older housing around Downtown Union Springs, the newer construction toward the courthouse square, and everything out past the Bullock County Courthouse.

Union Springs has enough older housing stock that repair almost always beats replacement here, and enough new construction that we spend a lot of time on hardware that failed early.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

Signs you need french door repair in Union Springs

These are the french door repair faults we are called out to most often in Union Springs. If you recognise one, the underlying cause is usually the second half of the line.

  • The handle set turns but nothing engagesBroken multipoint gearbox or a failed drive.
  • The gearbox makes a grinding noise when the handle is liftedWear inside the multipoint gearbox, which usually fails completely soon after this starts.
  • The multipoint locks at the top but not the bottomThe active leaf has dropped, so the lower keeper is now below the shootbolt.
  • The astragal weatherstrip is compressed flat in one areaPoint loading where the leaves bind, and the seal has stopped working there.
  • Cold air pouring in down the middleFailed astragal weatherstrip on the joint between the leaves.
  • Daylight visible along the astragalWeatherstrip compressed flat or missing entirely.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

Why french door repair fails in the Black Belt

The wet winter and dry late-summer cycle here is severe enough that a door adjusted perfectly in February can bind badly by September.

Foundation movement under a French door opening drops one leaf relative to the other, and because the pair has to meet along a full-height joint, even slight movement shows as rubbing and a lock that will not throw.

Humidity swells both leaves toward each other, and since the meeting stile is where the two doors already have the tightest clearance, that is where a French door pair binds first every summer.

It is why the same repair done properly in Union Springs lasts, and the same repair done cheaply does not.

Local factors we account for in Union Springs: soil movement and sustained humidity — typical of the Black Belt.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

French door repair work we handle in Union Springs

  • Multipoint lock repairRepairing and replacing multipoint gearboxes, drive rods and keepers.
  • Interior French door serviceAlignment, hardware and hinge work on interior pairs.
  • Individual lite glass replacementReplacing failed or broken glass in single lites without replacing the whole door.
  • Astragal and weatherstrip replacementNew seals on the meeting stile so the middle joint actually closes.
  • Frame squaringCorrecting frames that have moved and taken the doors out with them.
  • Security upgradesReinforced strikes, longer fasteners and better flush bolts on exterior pairs.
  • Hinge repair and re-hangingCorrecting sag with proper fasteners into framing and re-hanging leaves plumb.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

How a Union Springs french door repair visit works

  1. Measure the reveal all the way aroundThe gap pattern between the leaves and around the frame tells us exactly what has moved and in which direction.
  2. Check both leaves independentlyOne door usually causes the problem, and treating both the same way makes it worse.
  3. Correct the hinges before the hardwareMultipoint locks and flush bolts cannot be adjusted into working if the door is sitting in the wrong place.
  4. Rebuild the seal at the meeting stileAstragal and weatherstrip get replaced together, because that centre joint is where the draft and the water come through. Through the Black Belt we check whether the opening has moved with the clay before we adjust anything, or the adjustment goes out again by next season.
  5. Set the locking hardwareKeepers adjusted so the shootbolts engage top and bottom with the handle lifting smoothly and no forcing.
  6. Check it seals along its lengthWe look for daylight and feel for draft down the full height of the meeting stile, not just at eye level.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

What affects the cost of french door repair in Union Springs

There is no single price for french door repair in Union Springs, because two doors with identical symptoms can need very different work. Here is what makes the difference:

  • multipoint lock repair versus full gearbox replacement
  • glass replacement in individual lites
  • interior versus exterior pairs, since exterior work includes weatherproofing
  • whether the frame itself has moved and needs correcting
  • astragal, weatherstrip and threshold replacement

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Union Springs.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

Areas we cover for french door repair in Union Springs

If you are in Downtown Union Springs, the courthouse square and the US-82 corridor, or anywhere near the Bullock County Courthouse, the Bird Dog Field Trial monument and the Chunnenuggee Ridge, we cover you.

Service area: Union Springs, Bullock County, Alabama — and the surrounding communities.

We also cover the nearby Bullock County and the Black Belt communities listed further down this page.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

French door repair in Union Springs: questions we get asked

Can one lite of glass be replaced or does the whole door need doing?

Individual lites can normally be replaced on their own. That is one of the advantages of a true divided or simulated divided light door.

My French doors bind in summer but are fine in winter. Is that normal?

Some seasonal movement is normal in Union Springs, but if it is bad enough to stop the door closing, there is usually an underlying alignment problem that the seasonal movement is pushing over the edge.

My French doors rub in the middle. Is that because the wood swelled?

Usually not. Nine times out of ten it is hinge sag on one leaf, and the giveaway is that the rub is worse at one end of the joint than the other. Real swelling affects the whole edge evenly and comes and goes with the season.

The handle on my French door spins without doing anything. What broke?

The multipoint gearbox or the drive connection inside the door. That is a replacement part matched to the specific system, and it is worth identifying the manufacturer before ordering.

The inactive door keeps moving when I close the active one. Why?

The flush bolts at the top and bottom of the inactive leaf have failed or are no longer reaching their keepers. Both need to be solidly engaged or the whole pair loses its reference point.

There is a draft right down the middle of my French doors. What fixes it?

The astragal weatherstrip on the meeting stile. It compresses flat over time and stops sealing, and it is a straightforward replacement that makes a large difference in Union Springs winters.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

Other door repair services in Union Springs


French Door Repair near Union Springs

We cover the surrounding Bullock County and the Black Belt communities as well:

All door repair services in Union Springs  ·  French Door Repair across Alabama  ·  All Alabama service areas

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now