Whether you are near the Wilcox County Courthouse, over in the courthouse square, or on the the AL-28 corridor side of Camden, it is the same coverage and the same crew.
A lot of what we see in Wilcox County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895What Camden customers call us about
These are the door closer repair faults we are called out to most often in Camden. If you recognise one, the underlying cause is usually the second half of the line.
- The closer arm is bentThe door has been forced open past its stop, usually by wind or by a cart.
- The door slams open against the wallBackcheck has failed or is not adjusted, and the arm and frame are taking the impact.
- Oil running down the door or the wallFailed seal inside the closer body. The unit needs replacing.
- The door closes fast then stops shortMismatched sweep and latch speed settings.
- The closer works well cold and slams when hotFluid thinning with temperature in a unit whose valves can no longer compensate.
- Mounting screws have pulled the door skin outwardA closer fitted to a hollow door without a reinforcing plate.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Why door closer repair fails in the Black Belt
Black Belt soil is the reason so many doors in this part of Alabama do not close right. That dark prairie clay swells dramatically when saturated and shrinks in a dry August, and a house sitting on it moves with it.
Water running down a door face and into a surface closer body corrodes the internals and the mounting fasteners, and a closer that has been wet repeatedly usually fails at the seal.
When a frame moves with the ground under it, the door binds somewhere in its swing, and people compensate by cranking the closer tighter, which is why so many doors are simultaneously hard to open and still not latching.
None of it is a reason to replace a door. It is a reason to use the right parts and set the door up correctly in the first place.
Local factors we account for in Camden: heavy rainfall and soil movement — typical of the Black Belt.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Door closer repair work we handle in Camden
- Hold-open arm serviceRepairing and adjusting hold-open functions.
- Wind and stop protectionFitting overhead stops so wind cannot destroy the closer arm.
- Concealed closer serviceOverhead concealed closers in aluminum storefront doors repaired or replaced.
- Spring hinge and closer conversionReplacing failed spring hinges with a proper closer where the door needs it.
- Closer adjustmentSetting sweep speed, latch speed and backcheck correctly for the door and its traffic.
- Fire door closer complianceMaking sure fire-rated openings close and latch fully every time.
- Mounting repairRepairing or reinforcing door and frame where closer fasteners have pulled out.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895How a Camden door closer repair visit works
- Watch the door close, twiceThe speed of the last few inches and the first few tells us most of what we need to know before we touch a valve.
- Rule out the door firstA closer struggling against a binding door is not a faulty closer. Hinges and reveal get checked before we condemn the unit. On prairie clay we look at the whole opening for racking, because a door here is usually reporting a foundation movement rather than a hardware fault.
- Adjust before replacingMany closers we are called to are serviceable and simply out of adjustment. That is a much smaller job and we say so.
- Match to the opening's dutyA fire door, an accessible entrance and an internal office door have different requirements, and the specification follows the door.
- Set for people, not just latchingOpening force is checked so the door is usable by everybody, then latch speed is set so it still closes properly.
- Fit a stop where it is neededA door with no stop will destroy its own closer the first time the wind catches it.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895What affects the cost of door closer repair in Camden
There is no single price for door closer repair in Camden, because two doors with identical symptoms can need very different work. Here is what makes the difference:
- adding overhead stops or hold-open functions
- fire rating and accessibility compliance requirements
- adjustment versus rebuild versus full replacement
- surface, concealed or floor mounted closer type
- whether the mounting has to be repaired or reinforced
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Camden.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Areas we cover for door closer repair in Camden
We work throughout Camden, including the courthouse square and the AL-28 corridor. If you are near the Wilcox County Courthouse, Roland Cooper State Park and the Alabama River, that is inside our normal service area.
We also cover the nearby Wilcox County and the Black Belt communities listed further down this page.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Door closer repair in Camden: questions we get asked
What size closer do I need?
It depends on the door width, weight and exposure. Exterior doors in Wilcox County also need to handle wind, and an undersized closer on a windy exposure gets destroyed.
Can I adjust the closer myself?
The valves are accessible, but they are easy to over-adjust and some closers will lose their spring tension entirely if a valve is backed out too far. If you are not sure which valve does what, it is worth a call first.
Our fire door is propped open. Is that a problem?
Yes, and it is one of the most common code violations we see. A fire door that cannot close and latch is not doing anything. If it gets propped because it is hard to use, that is the problem to solve.
My door does not close all the way. What is going on?
Either the closing force is too low, or the door is dragging on the frame in the last few inches. In Camden we see the second one often, because a frame that has moved makes a good closer look weak.
The closer arm on our door is bent. What causes that?
The door was opened past its limit, usually by wind catching it or by someone pushing it hard against a wall. Replacing the arm without adding an overhead stop just means it happens again.
Do door closers need different settings in summer and winter?
They can. The hydraulic fluid thins in heat and thickens in cold, so a closer set perfectly in Camden in August may close too slowly in January. Quality closers hold their setting better across the temperature swing.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Other door repair services in Camden
- Sliding Door Repair Camden
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Camden
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Camden
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Camden
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Camden
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Camden
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Camden
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Camden
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Camden
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Automatic Door Repair Camden
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Camden
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Camden
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Camden
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Camden
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Camden
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Door Closer Repair near Camden
We cover the surrounding Wilcox County and the Black Belt communities as well:
- Door Closer Repair in Moundville
- Door Closer Repair in Livingston
- Door Closer Repair in York
- Door Closer Repair in Butler
- Door Closer Repair in Eutaw
- Door Closer Repair in Greensboro
- Door Closer Repair in Marion
- Door Closer Repair in Uniontown
All door repair services in Camden · Door Closer Repair across Alabama · All Alabama service areas
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895