Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Foley Door Hinge Repair

Foley, Alabama · Baldwin County

Door Hinge Repair and Replacement in Foley, AL

We fix the cause of hinge failure rather than tightening screws that will be loose again by spring. Doors that have been sagging for a long time have usually damaged their own mortises, and that has to be repaired first.

  • Repair first, replace last
  • Homes & businesses
  • Baldwin County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

Door Hinge Repair diagram
Door Hinge Repair — Foley, Alabama

We service every part of Foley, including Downtown Foley and the OWA area, and the nearby Baldwin County towns like Daphne and Fairhope.

A lot of what we see in Baldwin County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

What Foley customers call us about

These are the door hinge repair faults we are called out to most often in Foley. If you recognise one, the underlying cause is usually the second half of the line.

  • Rust has locked the pin in placeUntreated steel hinges on an exposed opening, which will keep seizing until they are replaced.
  • Cracks in the jamb around the hinge mortiseThe jamb material has split under the load.
  • Hinge screws spin and will not tightenStripped screw holes in the jamb, or screws that only ever reached the jamb and not the framing.
  • Screw heads sitting proud of the leafThe screws are bottoming out in stripped holes and holding nothing.
  • Visible gap between the hinge leaf and the jambThe hinge is pulling away under load.
  • Paint cracking around hinge leavesMovement. The hinge is shifting every time the door swings.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

Foley conditions and door hinge repair

Between roughly 65 inches of rain a year, near-constant humidity and a June-to-November hurricane season, coastal doors work harder than doors anywhere else in Alabama.

A gust catching an open door and slamming it against its stop puts an enormous shock load through the top hinge, and that single event is often what starts a sag that develops over the following months.

Water running down a door edge collects at the hinge leaves and sits in the mortise, which corrodes the hinge and softens the jamb wood the screws are anchored in.

None of it is a reason to replace a door. It is a reason to use the right parts and set the door up correctly in the first place.

Local factors we account for in Foley: storm wind and heavy rainfall — typical of the Alabama Gulf Coast.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

What a door hinge repair call covers

  • Continuous hinge installationFull-length geared hinges for heavy commercial doors that keep tearing out standard hinges.
  • Screw hole repairRebuilding stripped holes so fasteners bite properly instead of spinning.
  • Sag correctionShimming and adjusting hinges to bring a dropped door back into its opening.
  • Long-screw anchoringRunning fasteners through the jamb into the structural framing so the hinge holds the real load.
  • Ball bearing hinge upgradeBearing hinges for heavy doors and doors fitted with closers.
  • Squeak eliminationCleaning, servicing and correctly lubricating hinges so they stay quiet.
  • Spring hinge adjustmentSetting self-closing spring hinges to the right tension.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

How we approach door hinge repair

  1. Measure the reveal all roundThe gap pattern around a sagging door points straight at which hinge has given up.
  2. Check what the screws are anchored intoMost repeat hinge failures are fastener failures, and that means finding the framing behind the jamb.
  3. Rebuild the anchorageWhere the screws no longer bite, we fill and re-drill so the fixings reach solid material, then fit long screws into framing.
  4. Match the hinge to the doorWeight, size, throw and finish. Heavy doors and doors with closers need bearing hinges.
  5. Re-hang and check the revealAn even gap top to bottom, latch side and hinge side, before we go anywhere near the lock.
  6. Confirm the lock still lines upCorrecting a sag moves the latch, so the strike is checked and adjusted as part of the same visit. Coastal jobs get stainless or coated fixings as standard, since anything else here is a return visit waiting to happen.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

What affects the cost of door hinge repair in Foley

There is no single price for door hinge repair in Foley, because two doors with identical symptoms can need very different work. Here is what makes the difference:

  • the weight and size of the door
  • how many hinges need replacement versus repair
  • standard hinges versus ball bearing or continuous hinges
  • whether the door also needs re-hanging or the strike relocated
  • whether the mortises or screw holes need rebuilding first

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Foley.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

Areas we cover for door hinge repair in Foley

Foley coverage runs across Downtown Foley, the OWA area, the AL-59 corridor and Magnolia Springs side, and out to the areas around OWA Parks and Resort, the Foley Railroad Museum and Graham Creek Nature Preserve.

Service area: Foley, Baldwin County, Alabama — and the surrounding communities.

We also cover the nearby Baldwin County and the Alabama Gulf Coast communities listed further down this page.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

Door hinge repair in Foley: questions we get asked

My door is sagging. Do I need a new door?

Almost never. A sagging door is a hinge problem, usually the top hinge losing its grip on the jamb. Once the fasteners are anchored into the framing properly the door comes back up and latches again.

Do heavy doors need special hinges?

Yes. Solid core, exterior and commercial doors, and any door with a closer on it, should be on ball bearing hinges. Plain butt hinges on a heavy door wear out fast and take the jamb with them.

Do you do commercial hinge work?

Yes, including continuous geared hinges for heavy traffic doors in Foley businesses that keep tearing standard hinges out of the frame.

Are the hinges on my sliding door serviceable?

Sliding doors do not use hinges, but French and swinging patio doors do, and they are heavy. Those hinges take a lot of load and are worth checking if the door has started dragging.

What makes hinges squeal?

Dry or worn pins, and sometimes grit in the knuckles. In Foley the doors that squeal first are usually exterior doors, because moisture strips the lubricant and starts surface corrosion inside the knuckle.

How long does hinge work take?

Straightforward hinge replacement is usually under an hour. If the mortises are damaged or the door needs re-hanging and the strike relocated, allow longer.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

Other door repair services in Foley


Door Hinge Repair near Foley

We cover the surrounding Baldwin County and the Alabama Gulf Coast communities as well:

All door repair services in Foley  ·  Door Hinge Repair across Alabama  ·  All Alabama service areas

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now