Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Frisco City Screen Door Repair

Frisco City, Alabama · Monroe County

Screen Door Repair in Frisco City, AL

The most common screen door call we get is a sliding screen that has fallen out of its track for the third time. That is a roller and track problem, not a screen problem, and no amount of forcing it back up will fix it.

  • Repair first, replace last
  • Homes & businesses
  • Monroe County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

Screen Door Repair diagram
Screen Door Repair — Frisco City, Alabama

Our territory takes in Frisco City and the communities around it in Monroe County, so calls from Main Street, the AL-21 corridor and out by the Frisco City depot all get the same response.

Between the established parts of Frisco City and the newer subdivisions, we see two different kinds of failure: worn-out frames on one side of town and worn-out hardware on the other.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

The screen door repair problems we see most in Frisco City

These are the screen door repair faults we are called out to most often in Frisco City. If you recognise one, the underlying cause is usually the second half of the line.

  • The spline has lifted out of the channel at a cornerShrunken or hardened spline, usually after several summers of UV exposure.
  • The frame is bent or racked out of squareUsually from being forced back into a track it was not sitting right in.
  • The screen door falls out of the trackWorn screen rollers or a bent top rail that no longer holds the panel in the head channel.
  • It takes real effort to slideSeized rollers or a track full of packed debris.
  • The storm door will not stay closedFailed closer or latch on a hinged storm door.
  • The mesh is torn or has holesStraightforward rescreen, and worth doing before the tear spreads.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

Frisco City conditions and screen door repair

Salt air is the single biggest factor on the coast. It attacks the steel inside roller bearings, hinge pins, latch mechanisms and closer springs, and it does it year round whether or not a storm ever comes.

Humidity corrodes the steel components in screen rollers and rusts the tiny springs in adjusters, so screens seize up and drop out of their track.

Wind gets behind a screen panel and pushes it out of the track, and on hinged screen and storm doors a gust catching the door is what tears closers out of the frame.

We see the pattern often enough across Monroe County that we usually know what we are looking at before we arrive.

Local factors we account for in Frisco City: sustained humidity and storm wind — typical of the Alabama Gulf Coast.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

What a screen door repair call covers

  • Screen track repairRepairing or replacing the channel the screen rides in.
  • Storm door repairClosers, latches, hinges, sweeps and glass or screen inserts on storm doors.
  • Pet mesh and pet grille installationHeavy-duty mesh and lower grilles for doors that dogs push against.
  • Solar screen installationSolar mesh to cut heat gain through screened openings.
  • Screen enclosure and porch panel repairRescreening porch and patio enclosure panels.
  • Hinged screen door repairHinges, latches, closers and screen panels on swinging screen doors.
  • Sliding screen replacementCustom-built replacement screen panels where the original is beyond repair.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

What happens when we get there

  1. Check it against the openingWe run the frame through its travel and watch where it tightens, which shows whether the fault is the frame or what it runs in.
  2. Check the frame for squareA racked frame will never slide properly. Corner keys get reset before anything else is considered.
  3. Choose the right meshStandard fiberglass, pet-resistant, solar or fine mesh, depending on pets, sun exposure and what insects you are dealing with.
  4. Rescreen with correct tensionEven tension and properly seated spline so the mesh does not sag or pull out of the channel. We check the drainage path on every coastal opening, because wind-driven rain gets in where ordinary rain never would.
  5. Fit and adjust the rollersBoth rollers set so the frame runs level and the latch meets its keeper without lifting.
  6. Test the full travelThe door should move with one finger, latch cleanly and stay in the track.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

What affects the cost of screen door repair in Frisco City

What a screen door repair job costs comes down to a handful of things, and we would rather be straight about them up front:

  • storm door hardware such as closers and latches
  • the mesh type chosen, from standard fiberglass to pet-resistant and solar
  • roller and track work in addition to the screen itself
  • rescreening versus repairing or replacing the frame
  • custom-built replacement panels where the original is not repairable

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Frisco City.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

Areas we cover for screen door repair in Frisco City

We work throughout Frisco City, including Main Street and the AL-21 corridor. If you are near the Frisco City depot and Monroeville just north, that is inside our normal service area.

Service area: Frisco City, Monroe County, Alabama — and the surrounding communities.

We also cover the nearby Monroe County and the Alabama Gulf Coast communities listed further down this page.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

Screen door repair in Frisco City: questions we get asked

What mesh should I use if I have dogs?

Pet-resistant mesh, which is a heavier vinyl-coated polyester, and often a pet grille across the lower section. Standard fiberglass will not survive a dog that pushes against it.

The screen slides hard even though it is not falling out. What is wrong?

Either the rollers have seized or the track is packed with debris. In Frisco City the track collects a surprising amount of grit, and it acts like grinding paste on the rollers.

Is it worth rescreening or should I just buy a new screen door?

Rescreening is far cheaper and the frame is usually fine. New panels only make sense when the frame is bent beyond straightening or the corners are gone.

My storm door blew open and broke. Can it be repaired?

Usually yes: the closer and its mounting take the damage. We repair the mounting and fit a wind chain so the next gust does not do the same thing.

How long does a rescreen take?

Usually under an hour per panel in Frisco City. If the frame needs straightening or corner keys replaced, allow a bit longer.

Can you make a screen that keeps out the tiny biting insects?

Yes, fine no-see-um mesh. It has a much tighter weave, and in the parts of Monroe County near water it is the only thing that actually works against the smallest biters.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

Other door repair services in Frisco City


Screen Door Repair near Frisco City

We cover the surrounding Monroe County and the Alabama Gulf Coast communities as well:

All door repair services in Frisco City  ·  Screen Door Repair across Alabama  ·  All Alabama service areas

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now