We cover Remlap and the rest of Blount County, from the AL-75 corridor across to the Locust Fork of the Black Warrior, and we are out this way often enough that Oneonta and Cleveland are on the same run.
Remlap has enough older housing stock that repair almost always beats replacement here, and enough new construction that we spend a lot of time on hardware that failed early.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Signs you need french door repair in Remlap
These are the french door repair faults we are called out to most often in Remlap. If you recognise one, the underlying cause is usually the second half of the line.
- The multipoint locks at the top but not the bottomThe active leaf has dropped, so the lower keeper is now below the shootbolt.
- The handle set turns but nothing engagesBroken multipoint gearbox or a failed drive.
- Screws visible pulling out of hingesHinge fasteners failing under the weight of a heavy glazed leaf.
- The gearbox makes a grinding noise when the handle is liftedWear inside the multipoint gearbox, which usually fails completely soon after this starts.
- The doors bind in summer and are loose in winterSeasonal wood movement compounding an existing alignment problem.
- Condensation in one of the litesFailed insulated glass in a single lite, replaceable on its own.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895What Remlap weather does to french door repair
Elevation means wind. Doors on exposed western walls take a beating that the same door in a sheltered valley subdivision would never see.
Storm wind on a pair of French doors loads the meeting stile and the flush bolts, and if the inactive leaf is not solidly bolted top and bottom, the wind will find that out for you.
Grit in the flush bolt sockets and the multipoint keepers stops those components seating fully, which means the doors are only partially locked even when the handle feels normal.
None of it is a reason to replace a door. It is a reason to use the right parts and set the door up correctly in the first place.
Local factors we account for in Remlap: storm wind and grit and dust — typical of the Sand Mountain and Lookout Mountain plateau.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895What we repair
- Handle and lockset replacementMatched handle sets and cylinders for French door pairs.
- Threshold and sill workNew adjustable thresholds and sill seals under a pair of doors.
- Security upgradesReinforced strikes, longer fasteners and better flush bolts on exterior pairs.
- Sliding French door serviceRollers, tracks and hardware on sliding French systems.
- Flush bolt repairHead and sill flush bolts on the inactive leaf repaired or replaced.
- Astragal and weatherstrip replacementNew seals on the meeting stile so the middle joint actually closes.
- Interior French door serviceAlignment, hardware and hinge work on interior pairs.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895What happens when we get there
- Measure the reveal all the way aroundThe gap pattern between the leaves and around the frame tells us exactly what has moved and in which direction.
- Check each leaf on its ownWith the inactive leaf bolted, we test the active one, then reverse it. Faults that look shared usually are not.
- Correct the hinges before the hardwareMultipoint locks and flush bolts cannot be adjusted into working if the door is sitting in the wrong place. Plateau jobs get seals and lubricants rated for freezing temperatures, since standard products stiffen and stop working when it matters.
- Rebuild the seal at the meeting stileAstragal weatherstrip is the hardest working seal on the door and it is usually the one that has been ignored.
- Set the locking hardwareKeepers adjusted so the shootbolts engage top and bottom with the handle lifting smoothly and no forcing.
- Test both leaves through a full cycleBoth doors should close, latch and seal without force.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895What affects the cost of french door repair in Remlap
Every french door repair call in Blount County is a little different, and the cost follows what the door actually needs:
- interior versus exterior pairs, since exterior work includes weatherproofing
- multipoint lock repair versus full gearbox replacement
- whether the frame itself has moved and needs correcting
- glass replacement in individual lites
- astragal, weatherstrip and threshold replacement
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Remlap.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Areas we cover for french door repair in Remlap
If you are in the AL-75 corridor, or anywhere near Straight Mountain and the Blackburn Fork, we cover you.
We also cover the nearby Blount County and the Sand Mountain and Lookout Mountain plateau communities listed further down this page.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895French door repair in Remlap: questions we get asked
The inactive door keeps moving when I close the active one. Why?
The flush bolts at the top and bottom of the inactive leaf have failed or are no longer reaching their keepers. Both need to be solidly engaged or the whole pair loses its reference point.
Are French doors less secure than a single door?
They can be, because there are two leaves and a joint in the middle. Reinforced strikes, solid flush bolts and long fasteners into the framing make a big difference and are inexpensive.
Can sagging French doors be fixed without replacing them?
Yes, and it is the usual outcome. The fix is proper hinge repair with fasteners reaching the structural framing, plus re-hanging the leaf plumb. Replacing a pair of French doors is a large job by comparison.
How long does French door repair take?
Most alignment and weatherstrip jobs in Remlap take two to four hours. Multipoint gearbox replacement or glass work can add time, especially if parts need ordering for a specific manufacturer.
Can one lite of glass be replaced or does the whole door need doing?
Individual lites can normally be replaced on their own. That is one of the advantages of a true divided or simulated divided light door.
The handle on my French door spins without doing anything. What broke?
The multipoint gearbox or the drive connection inside the door. That is a replacement part matched to the specific system, and it is worth identifying the manufacturer before ordering.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Other door repair services in Remlap
- Sliding Door Repair Remlap
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Remlap
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Remlap
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Remlap
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Remlap
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Remlap
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Remlap
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Remlap
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Remlap
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Door Closer Repair Remlap
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Automatic Door Repair Remlap
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Remlap
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- Interior Door Repair Remlap
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Remlap
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Remlap
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
French Door Repair near Remlap
We cover the surrounding Blount County and the Sand Mountain and Lookout Mountain plateau communities as well:
- French Door Repair in Oneonta
- French Door Repair in Cleveland
- French Door Repair in Locust Fork
- French Door Repair in Blountsville
- French Door Repair in Snead
- French Door Repair in Susan Moore
- French Door Repair in Hayden
- French Door Repair in Smoke Rise
All door repair services in Remlap · French Door Repair across Alabama · All Alabama service areas
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895