Between Remlap proper, the the AL-75 corridor area and the newer building out toward the Locust Fork of the Black Warrior, we stay busy in Blount County, and Oneonta is close enough that we are often nearby.
Door problems in Remlap tend to sort into two groups: older homes where the frames and jambs have taken decades of weather, and newer builds where the hardware was the cheapest part of the package and has already given up.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895The sliding door repair problems we see most in Remlap
These are the sliding door repair faults we are called out to most often in Remlap. If you recognise one, the underlying cause is usually the second half of the line.
- Daylight at the top or bottom cornerThe panel is out of plumb, usually from uneven roller adjustment or a frame that has moved.
- Cold air pouring in around the edgesCollapsed weatherstrip and worn pile seals, and often a gap the panel misalignment created.
- It slides fine one way and binds the otherOne roller of the tandem pair has collapsed, so the panel is running out of level.
- You can lift the panel visibly in its openingExcess head clearance from a sagging header, which is what lets it jump the track.
- The door takes both hands to moveAlmost always flat-spotted or seized rollers, sometimes a track that has worn into a trough.
- The handle pulls but nothing releasesBroken latch linkage inside the stile, or a snapped internal actuator rod.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895What Remlap weather does to sliding door repair
Elevation means wind. Doors on exposed western walls take a beating that the same door in a sheltered valley subdivision would never see.
Repeated freezes make the vinyl fin seal and bulb weatherstrip on a slider go brittle, and a brittle seal cracks the first time the panel closes hard against it, which is why so many doors here are draftier every January than the last.
Dust and grit settle into the bottom track constantly and get packed under the rollers, and once that layer is compacted a vacuum will not lift it and the wheels are riding on abrasive rather than on aluminum.
We factor that in on every sliding door repair job around Straight Mountain and the rest of Remlap.
Local factors we account for in Remlap: winter freezes and grit and dust — typical of the Sand Mountain and Lookout Mountain plateau.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895What a sliding door repair call covers
- Handle set replacementInterior and exterior pulls, including keyed exterior handle sets.
- Frame squaringShimming and refastening frames that have shifted out of square.
- Weep hole clearingOpening blocked sill drainage so the track sheds water instead of holding it.
- Roller replacementTandem steel or nylon roller assemblies matched to the door manufacturer and panel weight.
- Track repair and cappingStainless track caps installed over worn aluminum so the new rollers ride on a fresh surface.
- Panel realignmentRe-plumbing and adjusting the panel so it latches and seals across the full height.
- Anti-lift and security hardwareTrack locks, foot bolts and anti-lift blocks fitted to the panel.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895How we approach sliding door repair
- Start with the openingBefore the panel comes out we check the header for deflection and the sill for level, because a door cannot run true in an opening that is not.
- Pull and inspect the panelThe panel comes out so we can see the roller housings, the bottom rail and the condition of the track underneath. On the mountain we check weatherstrip condition carefully, because repeated hard freezes make it brittle long before it looks worn.
- Match the hardwareSliding door rollers are not universal. We identify the manufacturer and panel weight and fit the right tandem assembly rather than the closest thing on the truck.
- Bring the running surface backA pitted or peened track will destroy new rollers in a season, so it gets dressed, capped or replaced before anything goes back in.
- Level the panel, then set the heightBoth adjusters are wound together so the panel sits level and the interlock engages along its whole length, not just at the top.
- Hand it back working the way you use itWe open and close it the way you would, one-handed, and check the lock, the screen and the drainage before we leave.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895What affects the cost of sliding door repair in Remlap
We would rather tell you what drives the price than quote a number that turns out to be wrong once we see the door. On a sliding door repair job in Remlap, the main variables are these:
- how many panels the system has, since three and four panel doors take longer to set
- how much damage the worn track has taken before the call
- whether the frame has moved and needs shimming or refastening
- whether the fix is rollers only or rollers plus track repair
- the size and weight of the panel, since heavy insulated glass units need heavier assemblies
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Remlap.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Areas we cover for sliding door repair in Remlap
If you are in the AL-75 corridor, or anywhere near Straight Mountain and the Blackburn Fork, we cover you.
We also cover the nearby Blount County and the Sand Mountain and Lookout Mountain plateau communities listed further down this page.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Sliding door repair in Remlap: questions we get asked
Will new rollers fix a door that scrapes loudly?
Only if the track is still in good condition. Once a roller has broken through and the housing has been riding on bare aluminum, the track has a groove worn in it, and new rollers dropped onto that groove will fail quickly. That is when we cap the track.
Do you replace the glass in sliding doors too?
Yes. Fogged units where the insulated seal has failed, cracked panes and full tempered glass replacement are all part of what we do, and we can usually keep the existing frame.
Do you charge to come look at it?
We talk through the symptoms on the phone first, because a lot of sliding door problems can be narrowed down from a good description and a photo of the bottom rail. Call and we will tell you what we think is going on and what it takes to fix.
Do you repair the older aluminum sliding doors?
Yes, and there are a lot of them in Remlap. Aluminum frames from the sixties through the eighties are actually good candidates for repair because the frame material has not degraded; it is the rollers, the track surface and the weatherstrip that have worn out.
Can a sliding door that has stopped rolling be fixed, or does it need replacing?
Almost always fixed. The frame and glass are usually fine and it is the two small roller assemblies underneath that have failed. Replacing a whole patio door in Remlap is a several thousand dollar job; rebuilding the rollers and track is a fraction of that and gets you a door that rolls better than it has in years.
Do you work on the big multi-panel and stacking patio doors?
Yes. Those systems put a lot of weight on each roller and they are less forgiving of a frame that is even slightly out of square, so alignment work matters more on them than on a standard two-panel door.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Other door repair services in Remlap
- Door Lock Repair Remlap
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Remlap
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Remlap
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Remlap
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Remlap
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Remlap
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Remlap
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Remlap
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Door Closer Repair Remlap
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Automatic Door Repair Remlap
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Remlap
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Remlap
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Remlap
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Remlap
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Remlap
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Sliding Door Repair near Remlap
We cover the surrounding Blount County and the Sand Mountain and Lookout Mountain plateau communities as well:
- Sliding Door Repair in Oneonta
- Sliding Door Repair in Cleveland
- Sliding Door Repair in Locust Fork
- Sliding Door Repair in Blountsville
- Sliding Door Repair in Snead
- Sliding Door Repair in Susan Moore
- Sliding Door Repair in Hayden
- Sliding Door Repair in Smoke Rise
All door repair services in Remlap · Sliding Door Repair across Alabama · All Alabama service areas
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895